View previous topic :: View next topic |
Author |
Message |
Hunter
Joined: 09 Mar 2006 Posts: 16
|
Posted: Fri Apr 21, 2006 1:39 am Post subject: |
|
|
to Cmdr Gibs
It is not finished yet. You may be the first who will? do not stop. Cheers |
|
Back to top |
|
|
sergbuto
Joined: 14 Sep 2002 Posts: 2530 Location: Sweden
|
Posted: Fri Apr 21, 2006 2:47 am Post subject: |
|
|
Warhunter wrote: | HMS Hood
|
Cool. |
|
Back to top |
|
|
sergbuto
Joined: 14 Sep 2002 Posts: 2530 Location: Sweden
|
Posted: Fri Apr 21, 2006 3:01 am Post subject: |
|
|
Cdre Gibs wrote: | This is the 2nd time a ship I have been working on quietly has been also done by some1 else. At this rate I may as well hang up the towel ! |
One should never assume that he/she is the only person working on some particular ship. There is always a chance that somebody is doing the same kind of model as well. And I think there is nothing bad in such an ovelap. To everyone's benefit eventually.
Here is what I did on Hood quite a while ago but never finished due to lack of time. The only thing I can say guys: "Take care of the damage model". Without appropriate damage models these nice ships will be mostly an eye candy because it will be difficult to reproduce historical battles/events.
|
|
Back to top |
|
|
Warhunter
Joined: 04 Apr 2005 Posts: 28
|
Posted: Fri Apr 21, 2006 4:29 am Post subject: |
|
|
Here is another model of mine. It's a german landing craft, which was operating in areas like the Black Sea or the Mediterranean. There were mainly used to support landing operations, but also to attack Soviet oil transports.
I plan to versions:
2x 20mm single barrel, 1x 20mm quad barrel, 2x 88mm main guns
2x 20mm single barrel, 1x 37mm single barrel, 2x 105mm main guns
|
|
Back to top |
|
|
Warhunter
Joined: 04 Apr 2005 Posts: 28
|
Posted: Fri Apr 21, 2006 4:35 am Post subject: |
|
|
AG124 wrote: |
Do you have her working for SHIII yet? |
yes but without textures. |
|
Back to top |
|
|
AG124
Joined: 28 Jun 2005 Posts: 770 Location: Canada
|
Posted: Fri Apr 21, 2006 8:18 am Post subject: |
|
|
This is why Iambecomelife and I usually discuss the ships we are working on. We are kitbashing merchants, which is quite different than what you guys are doing, but it would not be good if we were all working on the same ones in some cases (whale factories, for example).
The three of you should work out which ships you are going to work on so that a wider range of ships will be completed. |
|
Back to top |
|
|
booger2005
Joined: 11 Jan 2006 Posts: 183 Location: Akron Ohio
|
Posted: Fri Apr 21, 2006 8:42 am Post subject: |
|
|
Warhunter wrote: | Here is another model of mine. It's a german landing craft, which was operating in areas like the Black Sea or the Mediterranean. There were mainly used to support landing operations, but also to attack Soviet oil transports.
I plan to versions:
2x 20mm single barrel, 1x 20mm quad barrel, 2x 88mm main guns
2x 20mm single barrel, 1x 37mm single barrel, 2x 105mm main guns
|
Very nice. Reminds me of the German flak barges from IL2. Is that what you call an "f-lighter"? |
|
Back to top |
|
|
Warhunter
Joined: 04 Apr 2005 Posts: 28
|
|
Back to top |
|
|
Warhunter
Joined: 04 Apr 2005 Posts: 28
|
Posted: Fri Apr 21, 2006 11:50 am Post subject: |
|
|
In order to prevent us modelling the same ships, I started a collection thread about ships, which are currently under development. |
|
Back to top |
|
|
Type941
Joined: 17 May 2005 Posts: 1311 Location: U-52
|
Posted: Fri Apr 21, 2006 2:34 pm Post subject: |
|
|
sergbuto wrote: | Cdre Gibs wrote: | This is the 2nd time a ship I have been working on quietly has been also done by some1 else. At this rate I may as well hang up the towel ! |
One should never assume that he/she is the only person working on some particular ship. There is always a chance that somebody is doing the same kind of model as well. And I think there is nothing bad in such an ovelap. To everyone's benefit eventually.
Here is what I did on Hood quite a while ago but never finished due to lack of time. The only thing I can say guys: "Take care of the damage model". Without appropriate damage models these nice ships will be mostly an eye candy because it will be difficult to reproduce historical battles/events.
|
I wonder why you guys would rather make some tanker than this!!! I mean... it's like you pick a yugo over ferrari when you can get the ferrari. Please if anyone ever finds time to see it through, this could be one of most popular downloads ships for SH3. :lost: |
|
Back to top |
|
|
booger2005
Joined: 11 Jan 2006 Posts: 183 Location: Akron Ohio
|
Posted: Fri Apr 21, 2006 3:43 pm Post subject: |
|
|
Type941 wrote: | sergbuto wrote: | Cdre Gibs wrote: | This is the 2nd time a ship I have been working on quietly has been also done by some1 else. At this rate I may as well hang up the towel ! |
One should never assume that he/she is the only person working on some particular ship. There is always a chance that somebody is doing the same kind of model as well. And I think there is nothing bad in such an ovelap. To everyone's benefit eventually.
Here is what I did on Hood quite a while ago but never finished due to lack of time. The only thing I can say guys: "Take care of the damage model". Without appropriate damage models these nice ships will be mostly an eye candy because it will be difficult to reproduce historical battles/events.
|
I wonder why you guys would rather make some tanker than this!!! I mean... it's like you pick a yugo over ferrari when you can get the ferrari. Please if anyone ever finds time to see it through, this could be one of most popular downloads ships for SH3. :lost: |
I agree, its nice and I hope it gets finished, but please don't bash those that would rather make "some tanker." Capital ships like the Hood (and Iowa) are very, very rare. Meanwhile, about 99.9% of the time in SH3 is dedicated to finding and attacking merchant shipping. Frankly, many people, myself included, were getting quite tired of sinking the same 8 or so merchant ships, most of which aren't very representative of the 1940s merchant fleet, and the work of AG124, iambecomelife, sergbuto, and others is very much hopeful and appreciated. |
|
Back to top |
|
|
CCIP
Joined: 17 Apr 2005 Posts: 3224 Location: Ottawa, Canada [Grid BA7311]
|
Posted: Fri Apr 21, 2006 4:06 pm Post subject: |
|
|
Yea, as much as I'd like a nice model of that Hood in there... let Bismarck sink the Hood, I want my tankers :8
Still, all of you guys keep at it! |
|
Back to top |
|
|
iambecomelife
Joined: 11 Apr 2005 Posts: 1047
|
Posted: Fri Apr 21, 2006 11:24 pm Post subject: |
|
|
Will the real HMS Hood please stand up?
They look fantastic - I've always wondered how warship modders managed to get all the precise details to look correct (or at least a good approximation of reality).
@CCIP - I've been wondering about tankers myself. ATM I think there are three modded ones - a very large one I made (WIP), AG124's coastal tanker (released) and the Empire Celt, also by AG124 (WIP). I'm not releasing my first tanker because of QC issues, and I think AG124 said the same thing about one of his own WIP tankers. We probably need more medium ships between 5000-8500 tons, along with a much smaller number of extremely large and small ones. |
|
Back to top |
|
|
iambecomelife
Joined: 11 Apr 2005 Posts: 1047
|
Posted: Fri Apr 21, 2006 11:28 pm Post subject: |
|
|
Uapa wrote: | Hi!
I'have a question is it possible to make a sailing ship? |
I think the biggest problem would be the sails. To look realistic they would have to be affected by the wind, and the game represents all ships' surfaces as solid materials. |
|
Back to top |
|
|
Boris
Joined: 07 Jun 2005 Posts: 185 Location: Bendigo, Australia
|
Posted: Fri Apr 21, 2006 11:32 pm Post subject: |
|
|
Is there an ETA on the release of your ships iambecomelife? |
|
Back to top |
|
|
|