View previous topic :: View next topic |
Author |
Message |
edpet23
Joined: 18 May 2005 Posts: 4
|
Posted: Tue Aug 02, 2005 2:29 pm Post subject: [FAQ] Add ships to piers in harbors...in three steps!! |
|
|
This is how I've added docked ships to harbor piers, it can be done for single missions and for the campaign_SCR, the steps are the same for both, {This is written assuming you know how to use the mission editor}.
Step 1:
------------------------------------------------------------------------------------
Open or create a mission, choose a harbor and zoom into it with mouse wheel. Then once you zoom in simply select a ship and place it between the piers of the harbor, zoom as close as you can and place the ship dead center between the piers. "Remember your icon represents where the center of the ship will dock on the pier". Once the ship is added, then add ONE waypoint, 700-800m. distance should be sufficient. However make sure the waypoint goes in the heading as the dock.
Step 2:
-------------------------------------------------------------------------------------
Right click the ship icon and select properties and set the speed to 5km or above, "I find 9km best". But do make sure it's above 5km. setting any lower will make it more difficult to be precise with the ship's alignment on the pier. Close properties and then right click the ship icon and select "Head to waypoint". This will make the ship face in the correct direction, next open properties again and once again reset the speed to zero "0" km. check "docked ship" and uncheck "Delete on last waypoint " and close properties.
NOTE:
Be sure the "Docked ship" is checked and "Delete on last waypoint" is un-checked!!
Step 3:
-------------------------------------------------------------------------------------
Now select the single waypoint you added and select "Delete", now all you have is the ship's icon with no waypoint. Now "Validate" the mission but disregard anything it might say regarding waypoints or of ships being to close and stuff, click "close". Now select "File" and "Save", then then select "Save mission".
-------------------------------------------------------------------------------------
That's it!
Now you can put U-boats in pens and have C-3 cargo ships under those lage cranes, heck Ive added a FW200 and 2 Me109's flying a search patrol as my U-boat sails out to sea. If you like you can add say a fishing ship leaving the piers and then stopping to fish in a area off to the side or have a patrol or "Schnellboot" patrol the entrance to the harbor and be there upon your arrival.
Those are just a few of the things I've done to both single missions and Campaign_SCR {1.4} with no problems. |
|
Back to top |
|
|
Duke of Earl
Joined: 01 Feb 2003 Posts: 667 Location: 20 Meter von einer Wasserbombe
|
Posted: Tue Aug 02, 2005 2:36 pm Post subject: |
|
|
Good, clear instructions for the do-it-yourselfers... much appreciated
But, what about the 'anchored' function?... how does that fit in?
Cordialement, Duke of Earl |
|
Back to top |
|
|
mjr_health
Joined: 20 Apr 2005 Posts: 23 Location: Australia
|
Posted: Wed Aug 03, 2005 12:31 am Post subject: |
|
|
If you set a ships speed to 0 knots it will sit where you leave it. I found that if any destroyers know you are around they will start moving and chase you where as battleships, aircraft carriers and tankers will stay where they are untill it seems they hear a torp coming there way and then the take off. If yoy doc the ship even in a bay it wont move at all. Funny when you shoot a torp at a stationery target and then just as you think its going to hit the dam thing moves and you mis?? Fun to set an anchred convoy in a bay doing this and watch the fun. |
|
Back to top |
|
|
Gizzmoe
Joined: 22 Mar 2005 Posts: 3011 Location: Düsseldorf, Germany
|
Posted: Wed Aug 03, 2005 1:01 am Post subject: |
|
|
Thanks, edpet, I have made this thread sticky! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|